The size of the oil cup is mainly classified according to its type and purpose. The following are the specific parameters of common types:
Thread size
Straight-through pressure injection oil cup: Common thread specifications include M6×1, M8×1, M10×1, M14×1.5, etc., which are suitable for the connection requirements of different equipment.
Screw-on oil cup: Thread specifications such as M8×1, M10×1, etc., with the screw-on design to achieve quantitative injection of grease.
Spring cover oil cup: Thread specifications such as M6, M8×1, M10×1, etc., with a capacity range of 3cm³ to 200cm³.
Capacity specification
Straight-through pressure injection oil cup: The capacity is usually 3cm³, 6cm³, 12cm³, 18cm³, 25cm³, etc., to meet the needs of different lubrication cycles.
Screw-on oil cup: The capacity range is 25cm³, 50cm³, etc., suitable for medium and low frequency lubrication scenarios.
Spring cover oil cup: minimum capacity 3cm³, maximum capacity up to 200cm³, suitable for high flow demand scenarios.
Structural parameters
Steel ball diameter: According to the standard GB/T 308-2002, different thread specifications correspond to different steel ball diameters (such as M6 is 13mm, M8×1 is 6.5mm).
Marking method: Usually marked in the form of "oil cup + model + standard number" (for example: oil cup A25JB/T7940.3-1995).
