Tips for using nuts mainly include the following aspects:
Choose the right type of nut: Choose the right type of nut according to the specific application scenario. For example, the slider nut is suitable for situations where the contact area between the nut and the profile is not friendly, which can ensure the tightening effect.
Use a gasket to increase friction: When there is a gap between the nut and the screw hole, you can pad wood chips, paper pieces or special gaskets under the nut to increase friction and help the nut to be better fixed in the screw hole.
Use self-locking nuts: Self-locking nuts have anti-loosening and anti-vibration functions and are suitable for special occasions. Its working principle is to self-lock through friction to prevent the nut from loosening.
Use anti-loosening fluid: Apply anti-loosening fluid to the tightening place of the bolt, and then screw on the nut to achieve the effect of anti-loosening.
Double nut anti-loosening: Use a left-handed nut and a right-handed nut to tighten together, which can effectively prevent loosening.
Fix with pins: In machinery, pins can be used as assembly positioning, connection or relaxation devices. Common pin types include cylindrical pins, conical pins, perforated pins, split pins, and safety pins.
Tool selection: Using appropriate tools such as screwdrivers can help tighten the nuts better.
Observe the degree of looseness of the screws: If the screws are only slightly loose, tighten them directly with a screwdriver; if they are severely loose, you may need to consider replacing the screws.
